Propane Tank Permit Requirements
- An operational permit is required to store, use or dispense LP-gas. Permit fee is $87.00 per site.
- A construction permit is required for installation or modification of an LP-gas system. An electrical permit and inspection may be required by the Building Official. Permit fee is $87.00 per container.
- Tanks are clearly marked with "Flammable" and either "LP-Gas" or "Propane".
- Portable containers for temporary stationary use are placed on concrete pads, paved surfaces or firm earth.
- Approved vehicle protection shall be provided when containers are exposed to probable damage due to proximity to alleys, driveways or parking areas.
- Clearance from combustibles shall be kept not less than 10 feet from tanks or containers.
- Containers used in buildings under construction or undergoing major renovation follow appropriate codes and standards.
- Clearance from heat producing appliances and combustibles shall be maintained as set forth by the appliance listing and as approved.
- Fire extinguishers of an approved rating are provided, visible and accessible throughout the structure where there are combustibles and open flame devices used.
Site Assistant:
10000 Centennial Pkwy Sandy, UT 84070 